Turbine flow meter consists of turbine flow sensor and display instrument and it is made by us using foreign state-of-the-art technologies, which is an ideal gauge for measuring of liquid flow.
LWGY-N Type Sensor: 12 to 24V DC Power Supply; Pulse Output
LWGY-A Type Transmitter: 24V DC Power Supply; 2-wire 4 to 20 mA Output
Basic Type (Without Explosion Proof) and Explosion Proof Type are optional for LWGY-N and LWGY-A.
LWGY-B Type: powered with 3.2V10AH lithium battery (Battery life > 3 years); no output
LWGY-C Type: 24V DC Power Supply; 2-wire 4 to 20 mA Output (Optional: RS485 or HART)
|Size& Process Connection||DN4, 6, 10, 15, 20, 25, 32, 40; Thread connection (DN15, 20, 25, 32, 40) 50, 65, 80, 100, 125, 200 ,Flange connection|
|Accuracy/Range ratio||±0.5%R; 1:10; 1:15; 1:20|
|Sensor Material||SS304, SS316(L)|
|Ambient Conditions||Medium temperature: -20℃~+120℃; Atmospheric pressure: 86Kpa~106Kpa Ambient temperature: -20℃~+60℃;Relative humidity: 5%~90%|
|Output||Pulse ,4-20mA, RS485 communication, HART protocol|
|Power Supply||A: +24VDC, for 4-20mA , pulse, RS485 output B: 3.6 V lithium battery, battery voltage: 2.0 V ~3.0 V|
|Electrical connector||Standard: 3-core wire cable; Explosion-proof L: M20*1.5|
|Explosion -proof class||ExiaIICT4 or ExdIIBT6|
|Protection class||IP65 or higher(customized)|
|Type||LWGY-A||Flow sensor pulse output three-wire system, +12V power supply;|
|LWGY-B||Local display, powered by 3.6V battery;|
|LWGY-C||Local display with 4 ～ 20mA or pulse output, powered by 24V;|
|LWGY-D||Flow transmitter 4～20mA output, powered by 24V;|
|Nominal drift diameter||4||
Normal flow range m3/h
Extended flow range m3/h
|Explosion protection||Not marked, without explosion protection|
|B||Explosion protection type|
|Precision class||A||Precision: Class 0.5|
|B||Precision: Class 1.0|
|Turbine type||A||Normal flow range|
|B||Extended flow range|
Sensors with pipe diameter of DN4～DN40 are of thread connections with maximum operating pressure of 6.3Mpa.
Sensors with pipe diameter of DN50～DN200 are of flange connections with maximum operating pressure of 2.5Mpa.
Sensors with pipe diameter of DN4 ～ DN10 are provided with front and rear straight pipe sections and filters.
Please specify when placing an order if flange connections are required for pipe diameter of DN15～DN40.
Please specify when placing an order for high pressure type and special requirements.
1.Simple structure strong noise ration, wtih high interference(especially vibration interference) capability. Users learn to use and repair techniques easliy. Although sensors have moving parts, due to the new wear-resistant, anti-friction material, can be ensured a sufficiently long life. Even in exceptional circumstances(such as a catheter in a large foreign object damage)need to replace the impeller, due to the precise technology to ensure that instrument coefficient unchanged.
2.As the sensor, it is hardly generated in the duct pressure loss and heat in winter without heating, and therefore it is an energy saving insrument.
3.No need disruption of water supply when B type install or strike, and thus when design the official websitem doesn't need a bypass pipeline, so the table can be greatly reduced space well, and the basis for future investment and maintenance costs can be reduced.
4.Good performance and applicability, as the turbine flow meter, repeatable and reliable.